T 01204 398 131
E sales@flanges.co.uk

Valve - Butterfly - End of Hose

Back to Valves Main Page

FEATURES

Our end of hose butterfly valves are wafer type , and used at the end of a hose and provides tight sealing of liquid between tanker loadings. A Vulcanised rubber lining between the valve body which forms a sealing on non-flanged sealing faces, the valve is sandwiched between the rail hose flange and a spool or camlock and is located by locating lugs on the valve body to assist in positioning the larger diameter valves in the correct position.

Operation is by quarter turn of an actuator housing (Lever Locking Device) which allows the valve to be locked in the open or closed position and secured by bolts.

MATERIALS AVAILABLE

Body: ASTM A216 WCB
Disc: Aluminum Bronze
Shaft: Monel K500
Liner: NBR Vulcanised
Taper Pins: Monel
Lever Locking Device: Aluminum Bronze
Class Rating: ASA 150

Body: ASTM A216 WCB
Disc: Aluminum Bronze
Shaft: Monel K500
Liner: NBR Vulcanised
Taper Pins: Monel
Lever Locking Device:
Aluminum Bronze
Class Rating: ASA 150




 

Downloads - Adobe Acrobat Reader is required to view these files, and can be downloaded free HERE

DN50 - DN300 Datasheet

DN400 Datasheet